I know it’s been so long that I have shared
something on the blog. So today I am sharing yet another quick DIY of Mobile
Holder. Earlier, I have shared one such DIY of Mobile Stand if you haven’t
checked it yet then do check it out first. Today’s DIY is somewhat different
from that one. Let’s start with it!!
For this DIY, you will need a
cardboard cylinder. I got this cylinder with the wall sticker. But don’t be
disappointed if you haven’t the cardboard cylinder, you can use any cardboard
box and rest procedure will be same. Now just mark two points depending upon
the size of the holder that you want. I used 12 cm length as my holder’s length.
Mark two pints from one end of the cylinder- at 12 cm and 5cm. with the help of
a cutter, cut the cylinder around circumference of the base at 12 cm point. Be careful
while using cutter as it may be quite a task to do that.
Make a u shape passing through 5
cm point and starting from end of the cylinder. At the corners of the shape,
make two inward triangles to make slot which will hold the mobile in place. Again
cut this shape using cutter. Now lastly, decorate the holder with colors and
you can also use colored tap just like use it.
Now you know how to make it in
the easy way so do try this. You can use this holder in many ways like to hold
your phone, to shoot a video, and to click that perfect picture, etc.
Watch the video below to know the
entire process of this DIY and do subscribe our channel on YouTube as well.
Happy DIY!!
No comments:
Post a Comment