Today we will see an exciting DIY
to make a beautiful Clutch using old newspapers. This DIY is really interesting
and fun to work on. You just need some old newspapers to get it done. Let’s
start the process and see how to make it.
Take some newspapers and tear its
pages to start with the procedure. Divide each page into two halves and roll
them using some thin tube like object. Prepare around 42 such tubes of
newspaper and don’t forget to secure their ends with some glue. We will weave a
flat mat with these tubes and be extra careful while doing this step. Now place
24 tubes on a flat surface vertically and they must lie separate from each
other. Take a tube and place it horizontally at the top of vertical tubes. Now
place this tube such that alternate vertical tubes lie below this horizontal
tube while others lie at the top of this horizontal tube. Just keep on pasting one tube at bottom and
next tube on top of the horizontal tube. Follow the image for further
understanding. Follow this procedure with 17 more tubes and create a grid like
structure. Now make some mixture of water and glue by taking equal amounts of
water and glue. Apply this mixture all over the grid. Once done, let the grid
rest to dry properly for some time.
Cut out the extra part of tube to
get a perfect grid. Color the grid with golden pearl color and color only one
side of the grid as other side will be wrapped by some fabric. Once color gets
dried, apply some varnish to give smooth and shiny texture to the clutch. Again
let it dry for a day at least as varnish takes time to get dry.
We will need two kinds of fabric
for the inner part of the clutch- normal dark grey cotton cloth and other is
golden shining cloth. First, place the grid on the cotton and trace its
boundary. Cut the traced grid from cotton cloth and paste it on the non-colored
side of the grid with the hot glue gun. Again place this grid on the golden
cloth and trace its boundary leaving some extra space (around 4 cm as we have
to fold the fold the boundaries twice) on all the four sides. Now cut the
golden cloth with scissor. Fold extra space from all the four sides of the
golden cloth and paste it using hot glue gun. Paste this golden cloth on grey
cotton cloth on the grid and again fold the boundaries of the four sides of the
golden cloth on the grid and paste them using glue gun. Basic frame of the clutch
is ready.
Cut two strips of golden cloth of
width 9 cm and length 21 cm. Fold the strip across length joining their ends
such that it has only one joined side
and rest three are open. Now sew one open side (having other open side
opposite) so that it no longer remains open. Then using glue gun, fold some
inches from the other open side (opposite to the side which you have sewed)
towards outside so that it remains open. Do this step exactly same for another
strip. These strips will be the sides of your clutch. Fold the grid from one
side towards the opposite side and paste open side whose opposite side has been
sewed just like shown in the image. Paste another strip as well on the other
side.
Take a pair of magnetic clasp
snaps and insert one part of it at the center of the folded grid. Paste another
part on the inside of the grid at the top part opposite to the folded side. Now
fold the upper part of the grid as well and close the clutch by sticking the
button clasp snaps together.
Now we will decorate our clutch
using some pearls and stones. Take some golden flowered stones and paste them
across the clutch as shown in the image. Take some small golden pearls and make
a garland by inserting pearls into a thread through a needle. Seal the ends of
the garland and paste this garland across the stones just like shown in the
image. You can think of your own design and can customize this clutch for
yourself.
This Newspaper Clutch is apt for
any party, wedding or get-together. It’s easy to make and decorate at home with
just newspapers.
Happy DIY!!
No comments:
Post a Comment